,

GIGABYTE 1TB NAND Flash 2.5″ SATA III SSD

Gigabyte
  • Form Factor: 2.5-inch internal SSD
  • Interface: SATA 6.0Gb/s
  • Total Capacity: 1TB*
  • Sequential Read speed : up to 550 MB/s**
  • Sequential Write speed : up to 500 MB/s**
  • TRIM & S.M.A.R.T supported

 17,280

Product Specification

  • Interface: SATA 6.0Gb/s
  • Form Factor: 2.5-inch internal SSD
  • Total Capacity: 1TB
  • NAND: 3D NAND Flash
  • External DDR Cache: N/A
  • Sequential Read speed: Up to 550 MB/s
  • Sequential Write speed: Up to 500 MB/s
  • Random Read IOPS: up to 75k
  • Random Write IOPS: up to 85k
  • Dimension: 69.85 x 7 x 100 mm
  • Mean time between failure (MTBF): 2M hours
  • Power Consumption (Active): Average : R : 2240mW; W : 2610mW
  • Power Consumption (Idle): AVG. 330mW
  • Temperature (Operating): 0°C to 70°C
  • Temperature (Storage): -40°C to 85°C
  • Note:
    * Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
    * Performance may vary based on SSD’s firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark v.5.1.2 and I0meter 1.1.0.
    * Speeds based on internal testing. Actual performance may vary.
    * TBW (Terabyte Written):Terabytes Written” is the total amount of data that can be written into an SSD before it is likely to fail.
    * 1GB = 1 billion bytes. Actual useable capacity may vary.
    * 3 years or 600 TBW, whichever comes first.
    * TBW is evaluated by JEDEC workload standard.